Leica LS10 User Manual page 82

Import Data
Step-by-Step
LS10/LS15, Data Management
Step Description
1. Choose the desired settings in the Import screen:
2. Press Cont in the Import screen to proceed to the USB memory stick file direc-
tory.
3. Select the file or backup folder on the USB memory stick to be imported and
press Cont.
4. For a file:
Define the Job name for the imported file. Press Cont to import.
If a Job with the same name already exists in the internal memory, an informa-
tion message is displayed:
5. If you attach new points to the current job and a point with the same point ID
already exists, the following information message is displayed:
to skip all duplicate points.
Attach
To attach the new point to the current job and keep the existing point. The
existing point ID is renamed with a numerical suffix. For example, Point23 is
renamed to Point23_1. The maximum renamed suffix is 10, e.g. Point23_10.
Press (F4) and AlwAtt to attach all duplicate points to the current job.
For a backup folder:
Take note of the warning message displayed and press Cont to proceed and
import the folder.
6.
From:
USB-Stick or Internal Memory
File:
Import a single file or a backup folder.
OvWrite
To overwrite the existing job.
Attach
To attach the new points to the current job.
Rename
To rename the job.
OvWrite
To overwrite the point with the currently
displayed point ID. Press
overwrite all duplicate point IDs with the new
points.
Skip
To skip the point with the currently displayed
point ID. The new point is ignored and the
existing point is kept. Press
If the file is an ASCII file, the Define ASCII
Import screen is displayed. Define the delimiter
value, the units and the data fields of the file
and press Cont to continue.
(F4) and AlwOver to
(F4) and AlwSkip
82