Mapview; Overview; Mapview Components; Screen Area - Leica LS10 User Manual

11
11.1
Availability
Description
Access
11.2
11.2.1
Description
Elements of the
Map Page
LS10/LS15, MapView

MapView

Overview

The MapView functionality is only available on the LS15 instrument.
MapView is an interactive display feature embedded in the firmware. MapView
provides a graphical display of the current and the last four instrument stations. In the
MapView, all line measurements and intermediate sights are drawn according to their
orientation to give a better understanding of how the different measurement data are
related to each other.
The displayed data in all modes of MapView can be shifted by using both the arrow
keys and the touchscreen.
The MapView functionality is provided as a page within applications.
Within Q-Level or LineLevel, change to page Map.

MapView Components

Screen Area

Standard functionality is provided by softkeys, keys and a toolbar within MapView.
The softkeys are available regardless of the mode in which MapView was accessed and
always perform the same functions.
On the right side of the screen, a toolbar with icons is available. Some functions of the
toolbar can also be performed by using a softkey or key instead. Refer to the following
table for a description of the toolbar functions and their respective softkey/key equiv-
alents, if available.
009170_001_en
Symbol Description
North arrow. North is always orientated towards the top of the screen.
Scale of the current screen. The minimum is 0.04 m. There is no
maximum for the zoom but the scale cannot display values greater than
99999 m. In this case the value displayed will be >99999 m.
Position of the instrument station. The ID of a station is displayed in red.
Position of the foresight or backsight staff. The ID of the measured
points is displayed in black.
Intermediate point / Set-out point. The ID of such a point is displayed in
blue.
Measured line to the staff.
70