Softkeys - Leica LS10 User Manual

3.5
Description
Common Softkey
Functions
LS10/LS15, User Interface

Softkeys

Softkeys are selected using the relevant F1 to F4 function key. This chapter describes
the functionality of the common softkeys used by the system. The more specialised
softkeys are described where they appear in the program chapters.
Key Description
If entry screen: Confirms measured or entered values and continues the
Cont
process.
If message screen: Confirms message and continues with selected action
or returns to the previous screen to reselect an option.
To return to the last active screen.
Back
To change to the next page within a menu, program or settings screen.
Page
Yes/No To confirm or reject a warning or information message on a message
screen.
To display the lower softkey level.
To return to the upper softkey level.
To reset all editable fields to their default values.
Default/R
eset
To create a job, fixpoint or code.
New
Edit To edit existing values or data.
Insert To insert zero within an entry field.
To delete a single character within an entry field.
Delete
To delete all characters within an entry field.
Clear
ABC To change the keypad operation to alphanumerical.
345 To change the keypad operation to numerical.
To focus to the staff with auto-focus mode (only available on LS15).
Focus
To take a height and distance reading. Note: The values measured by
Dist
pressing Dist (softkey F2) are not stored to the job. To measure and store
use the trigger key.
Rec To store the measured data and continue the process.
To switch to the screen for setting out heights, height differences or
SetOut
distances.
To switch to the screen for surveying intermediate points.
INT
ENH To open the manual coordinate entry screen.
To search for fixed points or measurements.
Find
To display the list of available points.
List
To display the coordinate and job details of the selected point.
View
21