Leica LS10 User Manual page 96

Status information
on the instrument
Report stolen
instrument
Locate stolen
instrument
LS10/LS15, mySecurity
Step Description
1. Select Tools from the Main Menu.
2. Select Info from the Tools Menu.
3. Go to page 4/4 or Dates.
4. mySec.Renewal Date:
Displays the date when the instrument must be connected to mySecurity.
The date is transferred from myWorld to the instrument.

Ten days before the mySec.Renewal Date, a reminder message is displayed
each time the instrument is turned on.

When the mySec.Renewal Date has been exceeded, a message informs
about the instrument lock. Go to myWorld to renew the theft protection.
Step Description
1. Go to myWorld@Leica Geosystems (https://myworld.leica-geosys-
tems.com).
2. Select myTrustedServices/mySecurity.
3. Click the check box to select an instrument.
4. Click Details.
5. In the General section, click Report as Stolen.
6. A warning comes up to confirm device as stolen.
Click OK.
7. The Status of the instrument changes to Stolen!.
A Leica Geosystems service centre informs local authorities if such an instru-
ment turns up.
If a reported, stolen instrument is registered to myWorld, then the IP address of the
computer is logged. The IP address is used to locate the instrument.
In myWorld/myTrustedServices/mySecurity, the Status of the instrument changes
to Located.
Clicking Show Location shows:
• The date and time when the instrument was located
• The IP address of the computer
• A link to show the location on a map
96