Working With A Usb Memory Stick - Leica LS10 User Manual

13.4
Insert a
USB Memory Stick
Step-by-Step



Format a USB
Memory Stick
Step-by-Step
LS10/LS15, Data Management
Step Description
7. Once the file or backup folder has been successfully imported, a message is
displayed.

Working with a USB Memory Stick

2a 2
1 1
010758_001
Step Description
1. Open the battery compartment by pressing the push button underneath the
battery compartment.

The USB host port is located at the left side of the battery compart-
ment.
2. Insert the USB memory stick into the USB host port.
Always return to the Main Menu before removing the USB memory stick. If you
remove the stick without returning to the Main Menu, a warning message is
displayed.
Whilst other USB memory sticks may be used, Leica Geosystems recommends Leica
industrial grade USB memory sticks and cannot be held responsible for data loss or
any other error that may occur when using a non-Leica USB memory stick.
• Keep the USB memory stick dry.
• Use it only within the specified temperature range, -40°C to +85°C (-40°F to
+185°F).
• Protect the USB memory stick from direct impacts.
Failure to follow these instructions could result in data loss and/or permanent damage
to the USB memory stick.
If you use a completely new USB memory stick or if you want to delete all existing data,
format the USB memory stick before starting to store data.
If the instrument detects a non-recommended File Allocation Table (FAT) on the USB
stick, you are automatically prompted to format the USB stick upon insert. The recom-
mended FAT is FAT32. Follow the on-screen instructions to format with FAT32.
Step Description

Despite an automatic defragmentation, the USB memory stick gets frag-
mented after a while. Please format the USB memory stick periodically to main-
tain the instrument performance.
1.
Select Manage from the Main Menu.
83