Loading Software - Leica LS10 User Manual

12.5
Description

Loading Firmware
and Language Files
LS10/LS15, Tools

Loading Software

You can load a firmware file or additional languages on the instrument. To load a firm-
ware or language file, carry out the procedure described in the following paragraph.
• Never disconnect the power supply during the system upload process. The battery
must be at least 75% capacity before commencing the upload.
Step Description
1. Copy the firmware and language file into the system directory (e.g.
D:\system\) of the USB memory stick.

Loading a firmware file always requires to load a language file simultane-
ously. Before you start the process, ensure that the system directory of the
USB contains the firmware file and at least one language file.
2. Insert the USB memory stick into the USB interface within the battery
compartment.
3. Select Tools from the Main Menu.
4. Select Load FW from the Tools Menu.
5. • To load firmware and language files together, select F1 Firmware.
The Select File! screen is displayed. Select the firmware file from the
system directory of the USB memory stick.
Press Cont to display the Upload Languages! screen.
• To load only one or several language files, select F2 Language(s) only.
The Upload Languages! screen is displayed. To define which languages
you want to load, select Yes or No for each language file. At least one
language must be set to Yes.
6. To start loading the files, press Cont. Once the files are successfully loaded,
the system shuts down and restarts again automatically.
76