Q-Level Program; General - Leica LS10 User Manual

7.2
7.2.1
Description
Access
Available Pages
within the Q-Level
Program
LS10/LS15, Programs

Q-Level Program

General

The Q-Level program allows you to carry out a basic line levelling task using the BF
method. Each time you access Q-Level, a new Line is started and ended when you exit
the application. Use this program, if you immediately want to start measuring after
switching on and setting up the instrument.

You cannot adjust lines that are measured with the Q-Level application.
Select Q-Level from the Main Menu.

Use the Page key or the softkey Page (F3) to toggle between the different
pages.
Page Description
Meas This page displays the input/output fields for the current measure-
ment. For more details refer to "7.2.2 Measurement Procedure for
Q-Level".
Camera (only This page displays the live image of the overview camera. Use the
LS15) Camera page to quickly aim at the staff.
The selected levelling method is displayed in the upper right-hand
corner with the current measurement step (backsight or foresight)
highlighted red.
Last
Code
Map (only LS15) This page displays a graphical overview over the last five instrument
stations and the related measurements. For more details refer to
"11 MapView".
This page is only available after the first
measurement has been stored. The values
of the last measurement are displayed.
This page contains a list of codes.
Highlight a code to add it to the next meas-
urement. Press Edit to edit the selected
code in the Manage Codes screen. For
more details on managing codes, refer to "9
Coding".
46