Startup - Leica LS10 User Manual

4.4
Turn Instrument
On/Off or Enable
Standby Mode
Select a Language
For LS15: Level Up
with the Electronic
Level Step-by-Step
Activating Tilt Check
LS10/LS15, Operation

Startup

To turn the instrument on, press the ON/OFF key for 2 seconds.
To turn off the instrument or set it into standby mode, press the ON/OFF key and
select the appropriate option from the information screen.
After turning on the instrument, you can choose the preferred language. The language
choice screen is only shown if multiple languages are loaded onto the instrument and
Lang.Choice: On is set in the instrument settings. Refer to "6.2 Regional Settings".
The electronic level allows you to precisely level up the instrument.
Step Description
1. Turn on the instrument.
Tap on the Level & Tilt Check icon.
OR
Press the Favourites key

The bubble of the electronic level and the arrows for the rotating direc-
tion of the footscrews only appear if the instrument tilt is within the
sensors working range. To roughly level the instrument, centre the
bubble of the circular level first. Refer to "4.3 Instrument Setup".
2. Turn the instrument, so that the ocular is
positioned above footscrew C.
3. Turn the footscrews A and B simultane-
ously in opposite directions until the
bubble of the electronic level is approxi-
mately on the middle axis.

When levelled correctly, check marks are displayed. If the tilt of the
instrument exceeds 0.0700gon/0.0630°, the electronic level is out of
its working range and therefore, the frame becomes red. Once the level
is within the working range, the frame becomes black.
4. Centre the bubble of the electronic level for the second axis by turning the
footscrew C. An arrow shows the direction of rotation required.

When the bubble is centred and
the check marks are displayed,
the instrument has been
perfectly levelled up.
5. Accept with Cont.

If you activate the Tilt Check functionality, the instrument checks the longitu-
dinal and transversal tilt before taking a measurement. If the instrument needs
to be levelled again, a warning message is displayed.
To activate or deactivate the Tilt Check functionality, tap on the
icon and press the softkey Page (F3). On the Check page, select On or Off and press
the softkey Cont.
from within any program and select Level.
C
A B
Level & Tilt Check
25