Screen & Audio Settings - Leica LS10 User Manual

6.4
Access
Screen & Audio
Settings
LS10/LS15, Settings
Screen & Audio Settings
1. Select Settings from the Main Menu.
2. Select Screen... from the Settings Menu.
3.
Press the page key
Field Description
20% to 100%
Display Ill.
Touch Screen On
Off

Auto-Off Enable
Disable
Standby
The beep is an acoustic signal and is used in the following three vari-
Beep
ations:
Single beep: sounds as input confirmation after a key stroke or a
touchscreen event.
Triple beep: sounds when an error message is displayed or when a
function is not allowed.
Long beep: sounds after a measurement has been stored.
You can set the volume of the beep.
Normal
Loud
Off
Screensaver after 1 min, after 2 min,
after 5 min, after 10 min
Off
to scroll through the screens of available settings.
Sets the display illumination in steps of
20%.
The touchscreen is activated.
The touchscreen is deactivated.
To calibrate the touchscreen, press
Calib.. Follow the instructions on the
screen.
To abort the calibration routine, press the
ESC key.
The instrument switches off after
20 minutes without any activity.
The automatic switch-off function is
deactivated.

Battery discharges quicker.
The instrument switches to standby
mode after 5 minutes without any
activity.
Normal volume.
Increased volume.
Beep is deactivated.
The screensaver is activated and starts
after the selected time.
The screensaver is deactivated.
38