Linelevel Program; General - Leica LS10 User Manual

7.4
7.4.1
Description
Access
Available Pages
within the LineLevel
Program
LS10/LS15, Programs

LineLevel Program

General

The LineLevel program allows you to make detailed preferences before carrying out
a line levelling task:
• Setting a job
• Setting tolerances
• Setting a line and a measurement method
Lines measured within the LineLevel program can be adjusted later on with the inte-
grated LineAdjust program.
1. Select Programs from the Main Menu.
2.
Select LineLevel from the Programs Menu.
3. • To set a job, press F1.
• To set tolerances, press F2.
• To set a line and a method and start the levelling, press F4.

Use the Page key or the softkey Page (F3) to toggle between the different
pages.
Page Description
This page displays the input/output fields for the current measure-
Meas
ment. For more details refer to "7.4.5 Measurement Procedure for
LineLevel".
Camera This page displays the live image of the overview camera. Use the
(only LS15) Camera page to quickly aim at the staff.
The selected levelling method is displayed in the upper right-hand
corner with the current measurement step (backsight or foresight)
highlighted red.
Last
Code
Map (only LS15) This page displays a graphical overview over the last five instrument
stations and the related measurements. For more details refer to
"11 MapView".
This page is only available after the first
measurement has been stored. The values
of the last measurement are displayed.
This page contains a list of codes.
Highlight a code to add it to the next meas-
urement. Press Edit to edit the selected
code in the Manage Codes screen. For
more details on managing codes, refer to "9
Coding".
53