Test Patterns; Selecting A Test Pattern; Modifying Grey Level Test Pattern Characteristics; Modifying Ramp Test Pattern Characteristics - Christie Boxer 4K30 User Manual

Test patterns

Use the projector and light engine test patterns to assist with configuration of the projector and to
diagnose any issues that may occur.

Selecting a test pattern

21 test patterns are available to assist with the configuration of the projector and to diagnose any
issues that may occur.
1. From the side panel home page, use the arrows to select Test Pattern.
You can also select the test patterns from MENU > Test Pattern.
2. Scroll through the list of test patterns.
3. Select the required test pattern.
4. To confirm your selection, select Enter.

Modifying grey level test pattern characteristics

1. Select MENU > System Settings > Diagnostics.
2. Select Test Pattern.
3. Select one of the grey test patterns: GREY SCALE 16 or FLAT GREY.
4. Select Enter.
5. To change the grey scale of the test pattern, select Test Pattern Grey Level and adjust the
slider to the value you want.
6. To confirm your selection, select Enter.

Modifying ramp test pattern characteristics

1. Select MENU > System Settings > Diagnostics.
2. Select Test Pattern.
3. Select one of the ramp test patterns: RGBW RAMP, HORIZONTAL RAMP, VERTICAL RAMP, or
DIAGONAL RAMP.
4. Select Enter.
5. To turn on motion for the ramp test pattern and adjust the speed, select Test Pattern Ramp
Motion and adjust the slider to the value you want.
6. To confirm your selection, select Enter.
7. To change the slope of the ramp test pattern, select Test Pattern Ramp Slope and adjust the
slider to the value you want.
8. To confirm your selection, select Enter.
Boxer 4K30 User Manual
020-101777-01 Rev. 1 (03-2015)
Diagnostic Tools
29