Mld Snooping Configuration Commands; Display Mld-Snooping Group - HP A5120 EI Series Command Reference Manual

Hide thumbs Also See for A5120 EI Series:
Table of Contents

Advertisement

MLD snooping configuration commands

display mld-snooping group

Syntax
display mld-snooping group [ vlan vlan-id ] [ slot slot-number ] [ verbose ] [ | { begin | exclude | include
} regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
vlan vlan-id: Displays the MLD snooping group information in the specified VLAN, where vlan-id is in the
range of 1 to 4094. If you do not specify a VLAN, this command displays MLD snooping group
information in all VLANs.
slot slot-number: Displays information about MLD snooping groups on the specified switch. Displays
information about IGMP snooping groups on the specified switch. If the switch does not support IRF, the
slot-number argument must take 1. If the device supports IRF, the slot-number argument represents the IRF
member ID of the device. In an IRF fabric, if no member switch is specified, the command
displaysinformation about MLD snooping groups on each member switch.
verbose: Displays detailed MLD snooping group information.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, which is a case-sensitive string of 1 to 256 characters.
Description
Use the display mld-snooping group command to display MLD snooping group information, including
both dynamic and static MLD snooping group entries.
Examples
# Display detailed MLD snooping group information in VLAN 2.
<Sysname> display mld-snooping group vlan 2 verbose
Total 1 IP Group(s).
Total 1 IP Source(s).
Total 1 MAC Group(s).
Port flags: D-Dynamic port, S-Static port, C-Copy port
Subvlan flags: R-Real VLAN, C-Copy VLAN
38

Advertisement

Table of Contents
loading

Table of Contents