Time Zone Settings - D-Link xStack Reference Manual

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch WEB UI Reference Guide

Time Zone Settings

The following window is used to configure time zones and Daylight Savings Time settings for SNTP.
To configure the time zone settings for the Switch, click Configuration > SNTP Settings > Time Zone Settings:
The following parameters can be set:
Parameter
Daylight Saving
Time State
Daylight Saving
Time Offset in
Minutes
Time Zone Offset
from GMT in +/-
HH:MM
Using repeating mode will enable DST seasonal time adjustment. Repeating mode requires that the DST beginning
and ending date be specified using a formula. For example, specify to begin DST on Saturday during the second
week of April and end DST on Sunday during the last week of October.
From: Which Week
of the Month
Figure 2 - 27. Time Zone Settings window
Description
Use this pull-down menu to enable or disable the DST Settings.
Use this pull-down menu to specify the amount of time that will constitute your local DST offset
30, 60, 90, or 120 minutes.
Use these pull-down menus to specify your local time zone's offset from Greenwich Mean
Time (GMT.)
DST Repeating Settings
Enter the week of the month that DST will start on.
Time Zone and DST
35