Time And Sntp; Clock Settings; Time Zone Settings - D-Link DXS-3400 SERIES Web Ui Reference Manual

DXS-3400 Series Lite Layer 3 Stackable 10GbE Managed Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Unit
Click the Clear Attack Log button to clear the system attack log entries displayed in the table.

Time and SNTP

Clock Settings

This window is used to display and configure the time settings for the Switch.
To view the following window, click System > Time and SNTP > Clock Settings, as shown below:
The fields that can be configured are described below:
Parameter
Time
Date
Click the Apply button to accept the changes made.

Time Zone Settings

This window is used to display and configure time zones and Daylight Savings Time settings for SNTP.
To view the following window, click System > Time and SNTP > Time Zone Settings, as shown below:
Figure 3-15 System Attack Log Window
Description
Select the stacking unit ID of the Switch that will be displayed here.
Figure 3-16 Clock Settings Window
Description
Enter the current time in hours (HH), minutes (MM), and seconds (SS) here. For
example, 18:30:30.
Enter the current day (DD), month (MM), and year (YY) here. For example,
30/04/2015.
20