DSL-1500G SHDSL Ethernet Router User's Guide
RIP
Use the RIP menu to enable RIP version 1, version 2 or both for any interface. You can further specify whether
to enable RIP packets to be sent or accepted. RIP is disabled by default on all interfaces (sending and accepting
RIP packets).
RIP Menu
Select the Interface to configure for RIP and then select to RIP version 1 (V1), version 2 (V2) or Both for RIP
packets sent from the Router (Send) or accepted by the Router (Accept). When you have configured RIP
settings, click on the Apply button. You can save and reboot the system now, or continue to configure the Router.
Date & Time Settings
The Router can use Network Time Protocol (NTP) to set system time and date accurately using a public or
private NTP server. The function may be disabled if highly accurate time recording is not a priority.
Date & Time Configuration
28