AudioCodes Mediant 800B User Manual page 205

User's Manual
Parameter
TCP Port
[SIPInterface_TCPPort]
TLS Port
[SIPInterface_TLSPort]
SRD
[SIPInterface_SRD]
Message Policy
[SIPInterface_MessagePolicy]
TLS Mutual Authentication
[SIPInterface_TLSMutualAuth
entication]
Version 6.6
Notes:

This port must be outside of the RTP port range.

Each SIP Interface must have a unique signaling port (i.e., no
two SIP Interfaces can share the same port - no port
overlapping).
Defines the listening TCP port.
The valid range is 1 to 65534. The default is 5060.
Notes:

This port must be outside of the RTP port range.

Each SIP Interface must have a unique signaling port (i.e., no
two SIP Interfaces can share the same port - no port
overlapping).
Defines the listening TLS port.
The valid range is 1 to 65534. The default is 5061.
Notes:

This port must be outside of the RTP port range.

Each SIP Interface must have a unique signaling port (i.e., no
two SIP Interfaces can share the same port - no port
overlapping).
Assigns an SRD ID to the SIP Interface.
The default is 0.
Notes:

Each SRD can be associated with up to three SIP Interfaces,
where each SIP Interface pertains to a different Application
Type (GW/IP-to-IP, SAS, and SBC).

SIP Interfaces that are assigned to a specific SRD must be
defined with the same network interface. For example, if you
define three SIP Interfaces for SRD ID #8, all these SIP
Interfaces must be defined with the same network interface
(e.g., "SIP1").

To configure SRDs, see 'Configuring SRD Table' on page 201.
Assigns a SIP message policy to the SIP interface.
Note: To configure SIP message policies, see 'Configuring SIP
Message Policy Rules'.
Enables TLS mutual authentication per SIP Interface.

[-1] Not Configured = (Default) The
SIPSRequireClientCertificate global parameter setting is
applied.

[0] Disable = Device does not request the client certificate for
TLS connection.

[1] Enable = Device requires receipt and verification of the client
certificate to establish the TLS connection.
205
‎ 1 6. Control Network
Description
Mediant 800B GW & E-SBC