AudioCodes Mediant 800B User Manual page 752

Parameter
Web: MWI Suffix Pattern
EMS: MWI Suffix Code
[MWISuffixCode]
Web: MWI Source Number
EMS: MWI Source Name
[MWISourceNumber]
[MWISubscribeIPGroupID]
[NotificationIPGroupID]
[MWIQsigMsgCentreldIDParty
Number]
Digit Patterns The following digit pattern parameters apply only to voice mail applications that use
the DTMF communication method. For the available pattern syntaxes, refer to the CPE Configuration
Guide for Voice Mail.
Web: Forward on Busy Digit
Pattern (Internal)
EMS: Digit Pattern Forward On
Busy
[DigitPatternForwardOnBusy]
Web: Forward on No Answer
Digit Pattern (Internal)
EMS: Digit Pattern Forward On
No Answer
[DigitPatternForwardOnNoAn
swer]
User's Manual
Defines the digit code used by the device as a suffix for 'MWI On
Digit Pattern' and 'MWI Off Digit Pattern'. This suffix is added to the
generated DTMF string after the extension number.
The valid range is a 25-character string.
Defines the calling party's phone number used in the Q.931 MWI
Setup message to PSTN. If not configured, the channel's phone
number is used as the calling number.
Defines the IP Group ID used when subscribing to an MWI server.
The 'The SIP Group Name' field value of the IP Group table is used
as the Request-URI host name in the outgoing MWI SIP
SUBSCRIBE message. The request is sent to the IP address
defined for the Proxy Set that is associated with the IP Group. The
Proxy Set's capabilities such as proxy redundancy and load
balancing are also applied to the message.
For example, if the 'SIP Group Name' field of the IP Group is set to
"company.com", the device sends the following SUBSCRIBE
message:
SUBSCRIBE sip:company.com...
Instead of:
SUBSCRIBE sip:10.33.10.10...
Note: If this parameter is not configured, the MWI SUBSCRIBE
message is sent to the MWI server as defined by the MWIServerIP
parameter.
Defines the IP Group ID to which the device sends SIP NOTIFY
MWI messages.
Notes:

This is used for MWI Interrogation. For more information on the
interworking of QSIG MWI to IP, see Message Waiting
Indication on page 359.

To determine the handling method of MWI Interrogation
messages, use the TrunkGroupSettings_MWIInterrogationType,
parameter (in the Trunk Group Settings table).
Defines the Message Centred ID party number used for QSIG MWI
messages. If not configured (default), the parameter is not included
in MWI (activate and deactivate) QSIG messages.
The valid value is a string.
Defines the digit pattern used by the PBX to indicate 'call forward
on busy' when the original call is received from an internal
extension.
The valid range is a 120-character string.
Defines the digit pattern used by the PBX to indicate 'call forward
on no answer' when the original call is received from an internal
extension.
The valid range is a 120-character string.
752
Mediant 800B GW & E-SBC
Description
Document #: LTRT-10274