AudioCodes Mediant 800B User Manual page 231

User's Manual
ID.

Index 2 - changes the user part of the SIP From header to "200".

Index 3 - if the user part of the From header equals "unknown", then it is changed
according to the srcIPGroup call's parameter.

Index 4 - removes the Priority header from an incoming INVITE message.
Parameter
Index
[MessageManipulations_Index]
Manipulation Set ID
CLI: manipulation-set-id
[MessageManipulations_ManS
etID]
Matching Characteristics
Message Type
[MessageManipulations_Messa
geType]
Condition
[MessageManipulations_Condit
ion]
Version 6.6
Figure ‎ 1 7-5: Message Manipulations Page
Table ‎ 1 7-2: Message Manipulations Parameters
Defines the table row index for the rule.
The valid value is 0 to 99. The default is 0.
Note: Each rule must be configured with a unique index.
Defines a Manipulation Set ID for the rule. You can define the
same Manipulation Set ID for multiple rules to create a group of
rules. The Manipulation Set ID is used to assign the manipulation
rules to an IP Group (in the IP Group table) for inbound and/or
outbound messages.
The valid value is 0 to 19. The default is 0.
Defines the SIP message type that you want to manipulate.
The valid value is a string denoting the SIP message.
For example:

Empty = rule applies to all messages

Invite = rule applies to all INVITE requests and responses

Invite.Request = rule applies to INVITE requests

Invite.Response = rule applies to INVITE responses

subscribe.response.2xx = rule applies to SUBSCRIBE
confirmation responses
Note: Currently, SIP 100 Trying messages cannot be
manipulated.
Defines the condition that must exist for the rule to apply.
The valid value is a string.
For example:

header.from.url.user== '100' (indicates that the user part of the
From header must have the value "100")

header.contact.param.expires > '3600'

header.to.url.host contains 'domain'

param.call.dst.user != '100'
Description
231
‎ 1 7. SIP Definitions
Mediant 800B GW & E-SBC