Networking Configuration Examples - AudioCodes Mediant 800B User Manual

11.3.4 Networking Configuration Examples

This section provides configuration examples of networking interfaces.
11.3.4.1 One VoIP Interface for All Applications
This example describes the configuration of a single VoIP interface for all applications:
1. Multiple Interface table: Configured with a single interface for OAMP, Media and
Control:
Table ‎ 1 1-4: Example of Single VoIP Interface in Multiple Interface Table
Application
Index
Type
0 OAMP,
Media &
Control
2. IP Routing table: Two routes are configured for directing traffic for subnet
201.201.0.0/16 to 192.168.11.10, and all traffic for subnet 202.202.0.0/16 to
192.168.11.1:
Destination IP
Address
201.201.0.0
202.202.0.0
3. The NTP applications remain with their default application types.
11.3.4.2 VoIP Interface per Application Type
This example describes the configuration of three VoIP interfaces; one for each application
type:
1. Multiple Interface table: Configured with three interfaces, each for a different
application type, i.e., one for OAMP, one for Call Control, and one for RTP Media, and
each with a different VLAN ID and default gateway:
Table ‎ 1 1-6: Example of VoIP Interfaces per Application Type in Multiple Interface Table
Application
Index
Type
0 OAMP
1 Control
2 Media
User's Manual
Interface
IP Address
Mode
IPv4 192.168.0.2
Table ‎ 1 1-5: Example of IP Routing Table
Prefix Length
16 192.168.11.10
16 192.168.11.1
Interface
IP Address
Mode
IPv4 192.168.0.2
Manual
IPv4 200.200.85.14
Manual
IPv4 211.211.85.14
Manual
Prefix
Default
Length
16 192.168.0.1
Gateway IP
Metric
Address
Prefix
Gateway
Length
16 192.168.0.1
24 200.200.85.1
24 211.211.85.1
110
Mediant 800B GW & E-SBC
VLAN Interface
ID Name
1 myInterface
Interface Name
1 -
1 -
VLAN Interface
ID Name
1 ManagementIF
200 myControlIF
211 myMediaIF
Document #: LTRT-10274