AudioCodes Mediant 800B User Manual page 474

Parameter
Manipulation Purpose
[IPInboundManipulation_Manipulati
onPurpose]
Source IP Group ID
[IPInboundManipulation_SrcIpGrou
p]
Source Username Prefix
[IPInboundManipulation_SrcUserna
mePrefix]
Source Host
[IPInboundManipulation_SrcHost]
Destination Username Prefix
[IPInboundManipulation_DestUsern
amePrefix]
Destination Host
[IPInboundManipulation_DestHost]
Request Type
[IPInboundManipulation_RequestTy
pe]
Manipulated URI
[IPInboundManipulation_Manipulat
User's Manual
different SIP URI, source or destination, to the rule
configured in the row above as configured by the
'Manipulated URI' parameter (see below).
Defines the purpose of the manipulation:

[0] Normal = (Default) Inbound manipulations affect the
routing input and source and/or destination number.

[1] Routing input only = Inbound manipulations affect the
routing input only, retaining the original source and
destination number.

[2] Shared Line = Used for the Shared-Line Appearance
feature. This manipulation is for registration requests to
change the destination number of the secondary
extension numbers to the primary extension. For more
information, see 'BroadSoft's Shared Phone Line Call
Appearance for SBC Survivability' on page 444.
Defines the IP Group from where the incoming INVITE is
received.
For any IP Group, enter the value "-1".
Defines the prefix of the source SIP URI user name (usually
in the From header).
For any prefix, enter the asterisk "*" symbol (default).
Note: The prefix can be a single digit or a range of digits. For
available notations, see 'Dialing Plan Notation for Routing
and Manipulation' on page 641.
Defines the source SIP URI host name - full name (usually in
the From header). For any host name, enter the asterisk "*"
symbol (default).
Defines the prefix of the destination SIP URI user name
(usually in the Request-URI).
For any prefix, enter the asterisk "*" symbol (default).
Note: The prefix can be a single digit or a range of digits. For
available notations, see 'Dialing Plan Notation for Routing
and Manipulation' on page 641.
Defines the destination SIP URI host name - full name
(usually in the Request URI).
For any host name, enter the asterisk "*" symbol (default).
Defines the SIP request type to which the manipulation rule
is applied.

[0] All = (Default) All SIP messages.

[1] INVITE = All SIP messages except REGISTER and
SUBSCRIBE.

[2] REGISTER = Only REGISTER messages.

[3] SUBSCRIBE = Only SUBSCRIBE messages.

[4] INVITE and REGISTER = All SIP messages except
SUBSCRIBE.

[5] INVITE and SUBSCRIBE = All SIP messages except
REGISTER.
Determines whether the source or destination SIP URI user
part is manipulated.
474
Mediant 800B GW & E-SBC
Description
Document #: LTRT-10274