AudioCodes Mediant 800B User Manual page 479

User's Manual
Parameter
[IPOutboundManipulation_Priva
cyRestrictionMode]
Version 6.6
identity in outgoing SIP dialogs).

[0] Transparent = (Default) No intervention in SIP privacy.

[1] Don't change privacy = The user identity remains the
same as in the incoming SIP dialog. If a restricted number
exists, the restricted presentation is normalized as follows:

From URL header: anonymous@anonymous.invalid.

If a P-Asserted-Identity header exists (either in the
incoming SIP dialog or added by the device), a Privacy
header is added with the value "id".

[2] Restrict = The user identity is restricted (the restricted
presentation is as mentioned above).

[3] Remove Restriction = The device attempts to reveal the
user identity by setting user values in the From header and
removing the privacy "id" value if the Privacy header exists.
If the From header user is anonymous, the value is taken from
the P-Preferred-Identity, P-Asserted-Identity, or Remote-Party-
ID header (if exists).
The device identifies an incoming user as restricted if one of the
following exists:

From header user is anonymous.

P-Asserted-Identity and Privacy headers contain the value
"id".
Note: All restriction logic is performed after the user number has
been manipulated.
479
‎ 2 8. SBC Configuration
Description
Mediant 800B GW & E-SBC