AudioCodes Mediant 800B User Manual page 223

User's Manual
Parameter
Username
[Account_Username]
Password
[Account_Password]
Host Name
[Account_HostName]
Register
[Account_Register]
Version 6.6

FXS interfaces: Authentication table (see Configuring
Authentication)

UserName and Password parameters on the Proxy &
Registration page.
Defines the digest MD5 Authentication user name.
The valid value is a string of up to 50 characters.
Defines the digest MD5 Authentication password.
The valid value is a string of up to 50 characters.
Note: After you click the Apply button, this password is displayed as
an asterisk (*).
Defines the Address of Record (AOR) host name. It appears in
REGISTER From/To headers as ContactUser@HostName. For
successful registrations, this host name is also included in the
INVITE request's From header URI.
This parameter can be up to 49 characters.
Note: If this parameter is not configured or if registration fails, the
'SIP Group Name' parameter configured in the IP Group table is
used instead.
Enables registration.

[0] No (Default)

[1] Yes
When enabled, the device sends REGISTER requests to the Serving
IP Group. The host name (i.e., host name in SIP From/To headers)
and Contact User (user in From/To and Contact headers) are taken
from this table upon successful registration. See the example below:
REGISTER sip:xyz SIP/2.0
Via: SIP/2.0/UDP
10.33.37.78;branch=z9hG4bKac1397582418
From:
<sip:ContactUser@HostName>;tag=1c1397576231
To: <sip: ContactUser@HostName >
Call-ID: 1397568957261200022256@10.33.37.78
CSeq: 1 REGISTER
Contact:
<sip:ContactUser@10.33.37.78>;expires=3600
Expires: 3600
User-Agent: Sip-Gateway/v.6.00A.008.002
Content-Length: 0
Notes:

To activate registration, you also need to set the parameter
'Registration Mode' to 'Per Account' in the Trunk Group Settings
table for the specific Trunk Group.

The Trunk Group account registration is not affected by the
parameter IsRegisterNeeded.

For the IP-to-IP application, you can configure this table so that a
specific IP Group can register to multiple ITSP's. This is
performed by defining several rows in this table containing the
same Served IP Group, but with different Serving IP Groups,
user/password, Host Name and Contact User parameters.

If registration to an IP Group fails for all the accounts configured
in this table for a specific Trunk Group and if this Trunk Group
223
Description
Mediant 800B GW & E-SBC
‎ 1 7. SIP Definitions