AudioCodes Mediant 800B User Manual page 835

User's Manual
Parameter
Hunt Group Settings
Web: Hunt Group Settings
EMS: SIP Routing > Hunt
Group
[TrunkGroupSettings]
Web: Channel Select Mode
EMS: Channel Selection Mode
[ChannelSelectMode]
Version 6.6
[TrunkGroup]
FORMAT TrunkGroup_Index = TrunkGroup_TrunkGroupNum,
TrunkGroup_FirstTrunkId, TrunkGroup_FirstBChannel,
TrunkGroup_LastBChannel, TrunkGroup_FirstPhoneNumber,
TrunkGroup_ProfileId, TrunkGroup_LastTrunkId,
TrunkGroup_Module;
[\TrunkGroup]
For example: The configuration below assigns BRI channels 1
through 4 of Module 2 to Trunk Group ID 2 with phone numbers
208 to 211:
TrunkGroup 1 = 2, 0, 1, 4, 208, 0, 0 ,2;
Notes:

Trunk Group ID 1 is denoted as 0 in the table.

This parameter can appear up to four times per module.

For a description of this table, seeConfiguring Trunk Group
Table on page 293.
This table parameter configures the rules for channel allocation per
Trunk Group. The format of this parameter is as follows:
[TrunkGroupSettings]
FORMAT TrunkGroupSettings_Index =
TrunkGroupSettings_TrunkGroupId,
TrunkGroupSettings_ChannelSelectMode,
TrunkGroupSettings_RegistrationMode,
TrunkGroupSettings_GatewayName,
TrunkGroupSettings_ContactUser,
TrunkGroupSettings_ServingIPGroup,
TrunkGroupSettings_MWIInterrogationType,
TrunkGroupSettings_TrunkGroupName;
[\TrunkGroupSettings]
For example:
TrunkGroupSettings 0 = 1, 0, 5, branch-hq, user, 1, 255, ;
TrunkGroupSettings 1 = 2, 1, 0, localname, user1, 2, 255, ;
Note: For a description of this table, see 'Configuring Hunt Group
Settings' on page 295.
Defines the method for allocating incoming IP-to-Tel calls to a
channel for all Trunk Groups.

[0] By Dest Phone Number (default)

[1] Cyclic Ascending

[2] Ascending

[3] Cyclic Descending

[4] Descending

[5] Dest Number + Cyclic Ascending.

[6] By Source Phone Number

[7] Trunk Cyclic Ascending

[8] Trunk & Channel Cyclic Ascending

[9] Ring to Hunt Group

[10] Select Trunk by ISDN SuppServ Table

[11] Dest Number + Ascending
Notes:
835
‎ 5 1. Configuration Parameters Reference
Description
Mediant 800B GW & E-SBC