AudioCodes Mediant 800B User Manual page 477

User's Manual
Table ‎ 2 8-6: IP to IP Outbound Manipulation Table Parameters Description
Parameter
Matching Characteristics (Rule)
Additional Manipulation
[IPOutboundManipulation_IsAdd
itionalManipulation]
Source IP Group ID
[IPOutboundManipulation_SrcIP
GroupID]
Destination IP Group ID
[IPOutboundManipulation_DestI
PGroupID]
Source Username Prefix
[IPOutboundManipulation_SrcUs
ernamePrefix]
Source Host
[IPOutboundManipulation_SrcH
ost]
Destination Username Prefix
[IPOutboundManipulation_DestU
sernamePrefix]
Destination Host
[IPOutboundManipulation_DestH
ost]
Request Type
[IPOutboundManipulation_Requ
estType]
Version 6.6
Determines whether additional SIP URI user part manipulation
is done for the table entry rule listed directly above it.

[0] No = (Default) Regular manipulation rule - not done in
addition to the rule above it.

[1] Yes = If the previous table row entry rule matched the
call, consider this row entry as a match as well and perform
the manipulation specified by this rule.
Note: Additional manipulation can only be performed on a
different SIP URI (either source or destination) to the rule
configured in the row above (configured by the 'Manipulated
URI' parameter).
Defines the IP Group from where the INVITE is received.
For any Source IP Group, enter the value -1.
Defines the IP Group to where the INVITE is to be sent.
For any Destination IP Group, enter the value -1.
Defines the prefix of the source SIP URI user name (usually in
the From header).
For any prefix, enter the asterisk "*" symbol (default).
Note: The prefix can be a single digit or a range of digits. For
available notations, see 'Dialing Plan Notation for Routing and
Manipulation' on page 641.
Defines the source SIP URI host name - full name (usually in
the From header).
For any host name, enter the asterisk "*" symbol (default).
Defines the prefix of the destination SIP URI user name (usually
in the Request-URI).
For any prefix, enter the asterisk "*" symbol (default).
Note: The prefix can be a single digit or a range of digits. For
available notations, see 'Dialing Plan Notation for Routing and
Manipulation' on page 641.
Defines the destination SIP URI host name - full name (usually
in the Request URI).
For any host name, enter the asterisk "*" symbol (default).
Defines the SIP request type to which the manipulation rule is
applied.

[0] All = (Default) all SIP messages.

[1] INVITE = All SIP messages except REGISTER and
SUBSCRIBE.

[2] REGISTER = Only SIP REGISTER messages.

[3] SUBSCRIBE = Only SIP SUBSCRIBE messages.

[4] INVITE and REGISTER = All SIP messages except
SUBSCRIBE.

[5] INVITE and SUBSCRIBE = All SIP messages except
477
‎ 2 8. SBC Configuration
Description
Mediant 800B GW & E-SBC