Sbc And Crp Parameters - AudioCodes Mediant 800B User Manual

User's Manual
Parameter
[MSLDAPPrivateNumAttributeName]
[MSLDAPPrimaryKey]
[MSLDAPSecondaryKey]
LDAP Cache Service
[LDAPCacheEnable]
LDAP Cache Entry Timeout
[LDAPCacheEntryTimeout]
LDAP Cache Entry Removal Timeout
[LDAPCacheEntryRemovalTimeout]

51.14 SBC and CRP Parameters

The SBC and CRP parameters are described in the table below.
Parameter
CRP-Specific Parameters
Web: CRP Application
[EnableCRPApplication]
Version 6.6
The valid value is a string of up to 49 characters. The
default is "displayName".
Defines the name of the attribute that represents the user's
private number in the AD. If this value equals the value of
the MSLDAPPrimaryKey or MSLDAPSecondaryKey
parameter, then the device queries the AD for the
destination number in this private attribute name;
otherwise, this parameter is not used as a search key.
The default is "msRTCSIP-PrivateLine".
Defines the name of the attribute used as a query search
key for the destination number in the AD. This is used
instead of the "PBX" attribute name (configured by the
MSLDAPPBXNumAttributeName parameter).
The default is not configured.
Defines the name of the attribute used as the second
query search key for the destination number in the AD, if
the primary search key or PBX search is not found.
Enables the LDAP cache service.

[0] Disable (default)

[1] Enable
Notes:

For this parameter to take effect, a device reset is
required.

For more information on LDAP caching, see
'Configuring the Device's LDAP Cache' on page 182.
Defines the duration (in minutes) that an entry in the LDAP
cache is valid. If the timeout expires, the cached entry is
only used if there is no connectivity with the LDAP server.
The default is 1200.
Defines the duration (in hours) after which the LDAP entry
is removed from the cache.
The default is 0.
Table ‎ 5 1-70: SBC and CRP Parameters
Enables the CRP application.

[0] Disable (default)

[1] Enable
Note: For this parameter to take effect, a device reset is required.
857
‎ 5 1. Configuration Parameters Reference
Description
Description
Mediant 800B GW & E-SBC