AudioCodes Mediant 800B User Manual page 680

Parameter
Account Table
Web: Account Table
EMS: SIP Endpoints > Account
[Account]
Proxy Registration Parameters
Web: Use Default Proxy
EMS: Proxy Used
[IsProxyUsed]
Web/EMS: Proxy Name
[ProxyName]
Web: Use Proxy IP as Host
[UseProxyIPasHost]
User's Manual

For a description o this table, see Configuring
Authentication on page 395.
This table parameter configures the Account table for
registering and/or authenticating (digest) Trunk Groups or IP
Groups (e.g., an IP-PBX) to another Serving IP Group (e.g., an
Internet Telephony Service Provider - ITSP). The format of this
parameter is as follows:
[Account]
FORMAT Account_Index = Account_ServedTrunkGroup,
Account_ServedIPGroup, Account_ServingIPGroup,
Account_Username, Account_Password, Account_HostName,
Account_Register, Account_ContactUser,
Account_ApplicationType;
[\Account]
For example:
Account 1 = 1, -1, 1, user, 1234, acl, 1, ITSP1;
Note: For a detailed description of this table, see 'Configuring
Account Table' on page 221.
Enables the use of a SIP proxy server.

[0] No = (Default) Proxy isn't used and instead, the internal
routing table is used.

[1] Yes = Proxy server is used. Define the IP address of the
proxy server in the Proxy Sets table (see 'Configuring Proxy
Sets Table' on page 215).
Notes:

If you are not using a proxy server, you must define
outbound IP call routing rules in the Outbound IP Routing
Table (described in Configuring Outbound IP Routing Table
on page 323).

This parameter is applicable only to the GW/IP-to-IP
application.
Defines the Home Proxy domain name. If specified, this name
is used as the Request-URI in REGISTER, INVITE and other
SIP messages, and as the host part of the To header in INVITE
messages. If not specified, the Proxy IP address is used
instead.
The valid value is a string of up to 49 characters.
Note: This parameter functions together with the
UseProxyIPasHost parameter.
Enables the use of the proxy server's IP address (in dotted-
decimal notation) as the host name in SIP From and To
headers in REGISTER requests.

[0] Disable (default)

[1] Enable
If this parameter is disabled and the device registers to an IP
Group (i.e., proxy server), it uses the string configured by the
ProxyName parameter as the host name in the REGISTER's
Request-URI and uses the string configured by the IP Group
table parameter, SIPGroupName as the host name in the To
680
Mediant 800B GW & E-SBC
Description
Document #: LTRT-10274