AudioCodes Mediant 800B User Manual page 590

Column Name
IP Address The IP address can be one of the following:


Host Name
Host name (or IP address) as defined in the Outbound IP Routing Table.
Connectivity The method according to which the destination IP address is queried
Method periodically (SIP OPTIONS request).
Connectivity The status of the IP address' connectivity according to the method in the
Status 'Connectivity Method' field.





Quality Status
Determines the QoS (according to packet loss and delay) of the IP address.



Notes:


Quality Info. Displays QoS information: delay and packet loss, calculated according to
previous calls.
Notes:


DNS Status DNS status can be one of the following:



User's Manual
Table ‎ 4 4-6: IP Connectivity Parameters
IP address defined as the destination IP address in the Outbound IP
Routing Table.
IP address resolved from the host name defined as the destination IP
address in the Outbound IP Routing Table.
OK = Remote side responds to periodic connectivity queries.
Lost = Remote side didn't respond for a short period.
Fail = Remote side doesn't respond.
Init = Connectivity queries not started (e.g., IP address not resolved).
Disable = The connectivity option is disabled, i.e., parameter 'Alt Routing Tel
to IP Mode' (AltRoutingTel2IPMode ini) is set to 'None' or 'QoS'.
Unknown = Recent quality information isn't available.
OK
Poor
This parameter is applicable only if the parameter 'Alt Routing Tel to IP
Mode' is set to 'QoS' or 'Both' (AltRoutingTel2IPMode = 2 or 3).
This parameter is reset if no QoS information is received for 2 minutes.
This parameter is applicable only if the parameter 'Alt Routing Tel to IP
Mode' is set to 'QoS' or 'Both' (AltRoutingTel2IPMode = 2 or 3).
This parameter is reset if no QoS information is received for 2 minutes.
DNS Disable
DNS Resolved
DNS Unresolved
590
Mediant 800B GW & E-SBC
Description
Document #: LTRT-10274