AudioCodes Mediant 800B User Manual page 458

Notes:
The Classification table provides two configuration areas:

Matching characteristics of incoming IP call, for example, source IP address.

Operation - classifies call to an IP Group.
If the incoming call matches the characteristics of a rule, then the call is classified to the IP
Group configured for that rule.

To configure classification rules:
1. Open the Classification Table page (Configuration tab > VoIP menu > SBC >
Routing SBC > Classification Table).
2. Click the Add button; the following appears:
3. Configure the rule as required. For a description of the parameters, see the table
below.
4. Click Submit to apply your changes.
Parameter
Index
Matching Characteristics
Source SRD ID
User's Manual

Incoming REGISTER messages are saved in the device's registration
database and sent to a destination only if they are associated with a
source User-type IP Group.

The Classification table can also be configured using the table ini file
parameter, Classification.
Figure ‎ 2 8-5: Classification Table Page
Table ‎ 2 8-2: Classification Table Parameters
Defines the index number of the table row entry.
Defines the SRD ID of the incoming SIP dialog.
Description
458
Mediant 800B GW & E-SBC
Document #: LTRT-10274