Serial Parameters - AudioCodes Mediant 800B User Manual

Parameter
Community String
[SNMPReadOnlyCommunityStr
ing_x]
Community String
[SNMPReadWriteCommunitySt
ring_x]
Trap Community String
[SNMPTrapCommunityString]
SNMP Trusted Managers Table
Web: SNMP Trusted Managers
[SNMPTrustedMgr_x]
SNMP V3 Users Table
Web/EMS: SNMP V3 Users
[SNMPUsers]

51.2.5 Serial Parameters

The RS-232 serial parameters are described in the table below.
Parameter
[DisableRS232]
User's Manual
Defines up to five read-only SNMP community strings (up to 19
characters each). The default string is 'public'.
Defines up to five read/write SNMP community strings (up to 19
characters each). The default string is 'private'.
Defines the Community string used in traps (up to 19 characters).
The default string is 'trapuser'.
Defines up to five IP addresses of remote trusted SNMP
managers from which the SNMP agent accepts and processes
SNMP Get and Set requests.
Notes:

By default, the SNMP agent accepts SNMP Get and Set
requests from any IP address, as long as the correct
community string is used in the request. Security can be
enhanced by using Trusted Managers, which is an IP address
from which the SNMP agent accepts and processes SNMP
requests.

If no values are assigned to these parameters any manager
can access the device.

Trusted managers can work with all community strings.
This parameter table defines SNMP v3 users. The format of this
parameter is as follows:
[SNMPUsers]
FORMAT SNMPUsers_Index = SNMPUsers_Username,
SNMPUsers_AuthProtocol, SNMPUsers_PrivProtocol,
SNMPUsers_AuthKey, SNMPUsers_PrivKey,
SNMPUsers_Group;
[\SNMPUsers]
For example:
SNMPUsers 1 = v3admin1, 1, 0, myauthkey, -, 1;
The example above configures user 'v3admin1' with security level
authNoPriv(2), authentication protocol MD5, authentication text
password 'myauthkey', and ReadWriteGroup2.
Note: For a description of this table, see 'Configuring SNMP V3
Users' on page 80.
Table ‎ 5 1-14: Serial Parameters
Enables the device's RS-232 (serial) port.

[0] = Enabled
656
Mediant 800B GW & E-SBC
Description
Description
Document #: LTRT-10274