AudioCodes Mediant 800B User Manual page 476

Notes:

To configure IP-to-IP outbound manipulation rules:
1. Open the IP to IP Outbound Manipulation page (Configuration tab > VoIP menu >
SBC > Manipulations SBC > IP to IP Outbound).
2. Click the Add button; the following dialog box appears:
Figure ‎ 2 8-13: IP to IP Outbound Manipulation Page
3. Configure a rule as required. For a description of the parameters, see the table below.
4. Click Submit.
User's Manual

Manipulated destination SIP URI user names are done on the following
SIP headers: Request URI, To, and Remote-Party-ID (if exists).

Manipulated source SIP URI user names are done on the following SIP
headers: From, P-Asserted (if exists), P-Preferred (if exists), and
Remote-Party-ID (if exists)

SIP URI host name (source and destination) manipulations can also be
configured in the IP Group table. These manipulations are simply host
name substitutions with the names defined for the source and destination
IP Groups respectively.

The IP to IP Outbound Manipulation table can also be configured using
the table ini file parameter, IPOutboundManipulation.
- Add Dialog Box
476
Mediant 800B GW & E-SBC
Document #: LTRT-10274