AudioCodes Mediant 800B User Manual page 225

User's Manual

To configure the Proxy and registration parameters:
1. Open the Proxy & Registration page (Configuration tab > VoIP menu > SIP
Definitions submenu > Proxy & Registration).
2. Configure the parameters as required.
3. Click Submit to apply your changes.

To register or un-register the device to a Proxy/Registrar:

Click the Register button to register.

Click Un-Register button to un-register.
Instead of registering the entire device, you can register specific entities as listed below by
using the Register button located on the page in which these entities are configured:

FXS/FXO endpoints, BRI endpoints, Trunk Groups - Trunk Group Table page (see
Configuring Trunk Group Table on page 293)

Accounts - Account table (see 'Configuring Account Table' on page 221)
Click the Proxy Set Table
groups of proxy addresses. Alternatively, you can open this page from the Proxy Sets
Table page item (see 'Configuring Proxy Sets Table' on page
page).
Version 6.6
Figure ‎ 1 7-2: Proxy & Registration Page
button to Open the Proxy Sets Table page to configure
225
‎ 1 7. SIP Definitions
215 for a description of this
Mediant 800B GW & E-SBC