Show Uidb Index - Cisco XR 12000 Reference

show uidb index

show uidb index
To display micro-interface descriptor block (IDB) index information, use the show uidb index command in
EXEC mode.
show uidb index
Syntax Description
This command has no keywords or arguments.
Command Default
No default behavior or values
Command Modes
EXEC
Command History
Release
Release 3.2
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Use the show uidb indexcommand to display the micro-IDB index assigned by the software.
Task ID
Task ID
cisco-support
Examples The following example shows the output of the show uidb index command:
RP/0/0/CPU0:router# show uidb index
------------------------------------------------------------------------------
Location Interface-name
---------------------------------------------------------------------------
Cisco IOS XR Advanced System Command Reference for the Cisco XR 12000 Router, Release 5.1.x
88
0/1/CPU0 0
0/1/CPU0 GigabitEthernet0_1_5_0
1
0/1/CPU0 GigabitEthernet0_1_5_1
2
0/1/CPU0 GigabitEthernet0_1_5_2
3
0/1/CPU0 GigabitEthernet0_1_5_3
4
0/1/CPU0 GigabitEthernet0_1_5_4
5
Modification
This command was introduced.
Operations
read
Interface-Type Ingress-index
Main interface
Main interface
Main interface
Main interface
Main interface
Troubleshooting Commands
Egress-index
0 0
1
2
3
4
5
OL-30353-01