Procedure
12.4.2
Creating a new workpiece
You can set up various types of files such as main programs, initialization files, tool offsets,
etc. in a workpiece.
Note
Workpiece directories
You have the option of nesting tool directories. You must note that the length of the call line
is restricted. You will be informed if the maximum number of characters is reached when
entering the workpiece name.
Procedure
Turning
Operating Manual, 03/2013, 6FC5398-8CP40-3BA1
12.4 Creating a directory / program / job list / program list
1.
Select the "Program manager" operating area.
2.
Select your chosen storage medium, i.e. a local or USB drive.
3.
If you want to create a new directory in the local network, place the
cursor on the topmost folder and press the "New" and "Directory"
softkeys.
The "New Directory" window opens.
4.
Enter the desired directory name and press the "OK" softkey.
1.
Select the "Program manager" operating area.
2.
Select the desired storage location and position the cursor on the folder
in which you would like to create a workpiece.
3.
Press the "New" softkey.
The "New Workpiece" window appears.
Managing programs
645