Siemens SINUMERIK 840D sl Operating Manual page 525

Parameter
Function, rear face
Work offset
Write to the work offset
ZV (abs) - only for work
offset. write "yes"
ZV (inc)
See also
Program header (Page 234)
Program header with multi-channel data (Page 546)
Turning
Operating Manual, 03/2013, 6FC5398-8CP40-3BA1
Description
Work offset in which the coordinate system, which was shifted according to ZW
and by ZV as well as mirrored in Z, must be saved:
Basic reference
•
G54
•
G55
•
G56
•
G57
•
...
•
Yes
•
The Z value of the work offset can be directly written to the input screen form.
No
•
The actual Z value of the work offset is used.
Z value of the work offset.
Workpiece zero is offset in Z direction (the sign is also evaluated)
Programming technology functions (cycles)
8.7 Additional cycles and functions in ShopTurn
Unit
mm
mm
525