Siemens SINUMERIK 840D sl Operating Manual page 27

Turning
Operating Manual, 03/2013, 6FC5398-8CP40-3BA1
<NEXT WINDOW> + <CTRL> + <SHIFT>
• Moves the cursor to the beginning of a program.
• Moves the cursor in the first row of the current column.
• Selects a contiguous selection from the current cursor position
up to the target position.
• Selects a contiguous selection from the current cursor position
up to the beginning of the program.
<PAGE UP>
Scrolls upwards by one page in a window.
<PAGE UP> + <SHIFT>
In the program manager and in the program editor from the cursor
position, selects directories or program blocks up to the beginning
of the window.
<PAGE UP> + <CTRL>
Positions the cursor to the topmost line of a window.
<PAGE DOWN>
Scrolls downwards by one page in a window.
<PAGE DOWN> + <SHIFT>
In the program manager and in the program editor, from the cursor
position, selects directories or program blocks up to the end of the
window.
<PAGE DOWN> + <CTRL>
Positions the cursor to the lowest line of a window.
<Cursor right>
• Editing box
Opens a directory or program (e.g. cycle) in the editor.
• Navigation
Moves the cursor further to the right by one character.
<Cursor right> + <CTRL>
• Editing box
Moves the cursor further to the right by one word.
• Navigation
Moves the cursor in a table to the next cell to the right.
Introduction
1.2 Operator panel fronts
27