Procedure
Parameters, G code program
PRG
Name of the program to be generated
PL
Machining plane
Milling direction
•
•
RP
Retraction plane
SC
Safety clearance
F
Feedrate
parameters
Description
Machining
The following machining technologies can be selected:
∇ (roughing)
•
Machining
Face C
•
surface
Face Y
•
(only for
Face B
•
ShopTurn)
Peripheral surface C
•
Peripheral surface Y
•
Clamp/release spindle (only for end face Y/B and peripheral surface Y)
The function must be set up by the machine manufacturer.
(only for
ShopTurn)
Turning
Operating Manual, 03/2013, 6FC5398-8CP40-3BA1
1.
The part program or ShopTurn program to be processed has been
created and you are in the editor.
2.
Press the "Milling", "Contour milling" and "Spigot resid. mat." softkeys.
The "Spigot Res. Mat." input window opens.
3.
For the ShopTurn program, press the "All parameters" softkey if you
want to enter additional parameters.
Climbing
Conventional
mm
mm
mm/min
Programming technology functions (cycles)
Parameters, ShopTurn program
T
Tool name
D
Cutting edge number
F
Feedrate
S / V
Spindle speed or constant
cutting rate
8.5 Contour milling
mm/min
mm/tooth
rpm
m/min
Unit
471