Siemens SINUMERIK 840D sl Operating Manual page 650

Hide thumbs Also See for SINUMERIK 840D sl:
Table of Contents

Advertisement

Managing programs
12.4 Creating a directory / program / job list / program list
Template
You can select a template from Siemens or the machine manufacturer when creating a new
job list.
Executing a workpiece
If the "Select" softkey is selected for a workpiece, the syntax of the associated job list is
checked and then executed. The cursor can also be placed on the job list for selection.
Procedure
650
1.
Select the "Program manager" operating area.
2.
Press the "NC" softkey, and in directory "Workpieces" place the cursor
on the program for which you wish to create a job list.
3.
Press the "New" and "Any" softkeys.
The "Any New Program" window opens.
4.
Select entry "Job list JOB" from the "Type" selection field and enter a
name and press the "OK" softkey.
Operating Manual, 03/2013, 6FC5398-8CP40-3BA1
Turning

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sinumerik 828d turning

Table of Contents