Siemens SINUMERIK 840D sl Operating Manual page 263

Turning
Operating Manual, 03/2013, 6FC5398-8CP40-3BA1
6.1 X 48abs
6.2 α2 90°
6.3 Direction of rotation
R 23abs
Afterwards, entry fields are inactive.
6.4 Using the "Dialog selection" softkey, select a required contour element
and confirm using the "Dialog accept" softkey. The entry fields are
active again. Enter the additional parameters.
FS 2
6.5 Z -80abs
6.6 X 90abs
6.7 Z -95abs
7. Press the "Accept" softkey.
Finished-part contour
Creating a ShopTurn program
7.18 Example: Standard machining
FS 3
X 60abs
R 6
Z -85abs FS 3
K -35abs I 80 abs
263