Creating a ShopTurn program
7.18 Example: Standard machining
7. Stock removal (finishing)
8. Groove (roughing)
266
Set machining area limits No
4.
Press the "Accept" softkey.
1.
Press the "Cont. turn." and "Stock removal" softkeys.
The "Stock Removal" input window opens.
2.
Enter the following technology parameters:
T Finishing tool_D1
3.
Enter the following parameters:
Machining
Machining direction
Position
Machining direction
Allowance
Relief cuts
Set machining area limits No
4.
Press the "Accept" softkey.
1.
Press the "Turning", "Groove" and "Groove with inclines" softkeys.
The "Groove 1" entry field opens.
2.
Enter the following technology parameters:
T Grooving
tool
3.
Enter the following parameters:
Machining
Groove position
F 0.1 mm/rev
Finishing (∇∇∇)
Longitudinal
external
(from front to back)
No
Yes
D1
F 0.150 mm/rev
Roughing (∇)
Operating Manual, 03/2013, 6FC5398-8CP40-3BA1
V 450 m/min
V 220 m/min
Turning