Tool Alignment For Turning - Siemens SINUMERIK 840D sl Operating Manual

Working with a B axis (only 840D sl)

15.2 Tool alignment for turning

15.2 Tool alignment for turning
The input fields for the β and γ angles for aligning the tool are available in the tool screen
and in all turning screens.
β angle
In the entry field "β" you have the possibility of selecting the main alignment of the tool:
•
•
•
Programming when machining with a counterspindle
When machining on the counterspindle, it is programmed in exactly the same way as the
main spindle.
The direction display of the arrows depends on the settings.
γ angle
In the entry field "γ" you have the possibility of selecting the main alignment of the tool:
● 0°
● 180°
● Free entry field to enter the required angle
728
: β = 0°
: β = 90°
Empty : The required angle can be freely entered
Machine manufacturer
Please refer to the machine manufacturer's specifications.
- or -
Machine manufacturer
Please refer to the machine manufacturer's specifications.
Operating Manual, 03/2013, 6FC5398-8CP40-3BA1
Turning