Siemens SINUMERIK 840D sl Operating Manual page 553

Parameter Description
XRI Retraction plane X internal ∅ (abs) or retraction plane X referred to XI (inc)
- (only for retraction "extended" and "all")
ZRA Retraction plane Z front (abs) or
retraction plane Z referred to ZA (inc)
ZRI Retraction plane Z rear – (only for retraction "all")
Tailstock Yes
Tailstock is displayed for simulation / simultaneous recording
•
When approaching/retracting, the retraction logic is taken into account
•
No
XRR Retraction plane – (only "Yes" for tailstock)
Tool change point Tool change point
Work (Workpiece Coordinate System)
•
Machine (Machine Coordinate System)
•
Empty
•
XT Tool change point X
ZT Tool change point Z
SC Safety clearance (inc)
Acts in relation to the reference point. The direction in which the safety clearance is
active is automatically determined by the cycle.
S1 Maximum speed, main spindle
Machining Milling direction:
direction
Climbing
•
Conventional
•
Empty
•
Procedure
Turning
Operating Manual, 03/2013, 6FC5398-8CP40-3BA1
1. The ShopTurn program has been created.
2. Position the cursor on the program header.
3. Press the "Various" and "Settings" softkeys.
The "Settings" input window opens.
Multi-channel machining (only 840D sl)
9.2 Multi-channel support (only 840D sl)
Unit
mm
mm
mm
mm
mm
mm
mm
rev/min
553