Siemens SINUMERIK 840D sl Operating Manual page 300

Programming technology functions (cycles)
8.1 Drilling
Procedure
Parameters, G code program
PL Machining plane
RP Retraction plane
SC Safety clearance
Parameters Description
Machining
Single position
•
position
Drill hole at programmed position
(only for G code)
Position pattern
•
Position with MCALL
F1 Drilling feedrate
(only for G code)
Z0 Reference point Z
(only for G code)
Machining
Face C
•
surface
Face Y
•
(only for
Peripheral surface C
•
ShopTurn)
Peripheral surface Y
•
Position
At the front (face)
•
(only for
At the rear (face)
•
ShopTurn)
Outside (peripheral surface)
•
Inside (peripheral surface)
•
300
1. The part program or ShopTurn program to be processed has been
created and you are in the editor.
2. Press the "Drilling" softkey.
3. Press the "Thread" and "Cut thread" softkeys.
The "Drilling and thread milling" input window opens.
mm
mm
Parameters, ShopTurn program
T Tool name
D Cutting edge number
F Feedrate
S / V Spindle speed or constant
cutting rate
Operating Manual, 03/2013, 6FC5398-8CP40-3BA1
mm/min
mm/rev
rpm
m/min
Unit
mm/min
mm/rev
mm
Turning