14.2
Measuring the tool
All the options of the manual and automatic measurement are available to determine the tool
offset data (see also Section "Measuring the tool (Page 73)").
Procedure
14.3
Setting the zero offset
Procedure
See also
Setting the zero offset (Page 71)
Turning
Operating Manual, 03/2013, 6FC5398-8CP40-3BA1
1.
"Manual Machine" is active.
2.
Press the "Meas. tool" softkey.
3.
Select the the required measuring function via the vertical softkey bar
and press the appropriate softkey.
As an alternative to the "Set zero offset" function, you can select the values of
the zero offset directly in the zero offset list.
1.
"Manual Machine" is active.
2.
Press the "Zero offset" softkey in the "Parameters" operating area.
The "Zero Offset G54 ...599" window is opened.
Working with Manual Machine
14.2 Measuring the tool
709