Creating A New Workpiece - Siemens SINUMERIK 840D sl Operating Manual

...
8.4.2

Creating a new workpiece

You can set up various types of files such as main programs, initialization files, tool offsets,
etc. in a workpiece.
Note
Additional workpiece directories cannot be created within a workpiece directory (WPD).
Proceed as follows
...
HMI sl Universal
Operating Manual, 11/2006, 6FC5398-6AP10-1BA0
3. Press the "New" and "Directory" softkeys.
The "New directory" window appears.
4. Enter the desired directory name and press the "OK" softkey.
The new directory is displayed.
1. Select the "Program manager" operating area.
2. Select the desired storage location and position the cursor on the
folder, in which you would like to create a workpiece.
3. Press the "New" and "Workpiece" softkeys.
The "New workpiece" window appears.
4. If necessary, select a template if any are available.
Program management
8.4 Creating directories/programs
131