Tool management
11.6 Tool wear
Icons in the tool wear list
Icon/
Marking
Tool type
Red "X"
Yellow triangle pointing
downward
Yellow triangle pointing
upward
Green border
Magazine/location number
Green double arrow
Gray double arrow
(configurable)
Red "X"
Procedure
See also
Displaying tool details (Page 620)
Changing the cutting edge position or tool type (Page 622)
606
1.
Select the "Parameter" operating area.
2.
Press the "Tool wear" softkey.
Meaning
The tool is disabled.
The prewarning limit has been reached.
The tool is in a special state.
Place the cursor on the marked tool. A tooltip provides a
short description.
The tool is preselected.
The magazine location is positioned at the change position.
The magazine location is positioned at the loading position.
The magazine location is disabled.
Operating Manual, 03/2013, 6FC5398-8CP40-3BA1
Turning