Multi-Channel Support (Only 840D Sl); Working With Several Channels - Siemens SINUMERIK 840D sl Operating Manual

9.2

Multi-channel support (only 840D sl)

9.2.1

Working with several channels

Multi-channel support
SINUMERIK Operate supports you when generating the program, the simulation and when
running-in a program on multi-channel machines.
Note
Execution and simulation
The execution and simulation for multi-channel programming does not function if the
programs and the job list are on an external storage medium, e.g. on the local drive.
Multi-channel view
With the multi-channel view, you have the option of viewing several channels in parallel on
the display. This means that for multi-channel machines, the execution of several programs -
simultaneously started - can be monitored and controlled.
View of the channels
In the window "Settings for multi-channel view" or "Settings for multi-channel functionality",
you set which channels are important for the program execution and which channels are
displayed simultaneously. In so doing, you also define the channel sequence.
Note
Hidden channels
Hidden channels still belong to the group of channels that are handled together. They are
only temporarily excluded from the multi-channel view.
Turning
Operating Manual, 03/2013, 6FC5398-8CP40-3BA1
Software options
For the multi-channel functionality and support, i.e. for generating and editing
synchronized programs in the multi-channel editor as well as the block search,
you require the "programSYNC" option.
Software options
You require the "ShopMill/ShopTurn" option to generate and edit ShopTurn
machining step programs.
Multi-channel machining (only 840D sl)
9.2 Multi-channel support (only 840D sl)
533