Aligning Milling Tools - Only For G Code Program (Cycle800) - Siemens SINUMERIK 840D sl Operating Manual

Parameters Description
TC Name of swivel data set
Retract
No: No retraction before swiveling
•
Z: Retraction in the direction of machine axis Z
•
Tool direction, max.: Maximum retraction in tool direction
•
Tool direction, inc.: Incremental retraction in tool direction
•
ZR Retraction path - (only for incremental retraction in the tool direction)
β Rotation around the 3rd geometry axis (for G18 Y)
γ Rotation around the turning tool
Tool
Follow up
•
The position of the tool tip is maintained during swiveling.
No follow up
•
The position of the tool tip is not maintained during swiveling.
8.6.2.2

Aligning milling tools - only for G code program (CYCLE800)

Procedure
Parameter Description
TC Name of the swivel data record
Retraction
No: No retraction before swiveling
•
Z: Retraction in the direction of machine axis Z
•
Tool direction, max.: Maximum retraction in tool direction
•
Tool direction, inc.: Incremental retraction in tool direction
•
ZR Retraction path - (only for incremental retraction in the tool direction)
Turning
Operating Manual, 03/2013, 6FC5398-8CP40-3BA1
1. The part program to be executed has been created and you are in the
editor.
2. Press the "Various" softkey.
3. Press the "Swivel tool" and "Align milling tool" softkeys.
The "Align milling tool" input window opens.
Programming technology functions (cycles)
8.6 Further cycles and functions
Unit
Degrees
Degrees
Unit
483