Siemens SINUMERIK 840D sl Operating Manual page 570

Multi-channel machining (only 840D sl)
9.2 Multi-channel support (only 840D sl)
Parameters
Function
Synchronization function
Coordinate
system
XP
ZP
Function, complete
Coordinate
system
XP
ZP
Flush chuck
DIR
S
α1
Z1
ZR
570
Description
You can select one of the following functions:
Synchronizing
•
Complete
•
Gripping
•
Withdrawing
•
Rear face
•
Front face
•
Synchronizes with the counterspindle in the other channel.
MCS
•
The park position is specified in the machine coordinate system. Teaching
in the park position and angular offset is only possible in the machine
coordinate system.
Workpiece coordinate system
•
The park position is specified in the workpiece coordinate system.
Park position of tool in X direction (abs)
Park position of tool in Z direction (abs)
Gripping
MCS
•
The park position is specified in the machine coordinate system. Teaching
in the park position and angular offset is only possible in the machine
coordinate system.
WCS
•
The park position is specified in the workpiece coordinate system.
Park position of tool in X direction (abs)
Park position of tool in Z direction (abs)
Flush counterspindle chuck
Yes
•
No
•
Direction of rotation
Spindle rotates clockwise
•
Spindle rotates counter-clockwise
•
Spindle does not rotate
•
Spindle speed – (only when the spindle rotates)
Angular offset
Transfer position (abs.)
Position, feedrate reduction (abs or inc)
Position from which a reduced feedrate is used.
Operating Manual, 03/2013, 6FC5398-8CP40-3BA1
Unit
mm
mm
mm
mm
rev/min
Degrees
Turning