Endress+Hauser Proline Promag 55 Operating Manual page 101

Device functions Proline Promag 55 FOUNDATION Fieldbus
Endress+Hauser
Write access with
Parameter operating mode
(MODE_BLK)
Add. Line - AUTO - OOS
Display Mode
Add. Line Mux - AUTO - OOS
Assign
"Display" Transducer Block/base index 1800:
!
Note!
The option is not active unless one of the following was selected in the
parameter "Add. Line - Assign":
• MASS FLOW BARGRAPH IN %
• VOLUME FLOW BARGRAPH IN %
Use this parameter to define the format of the bar graph.
Options:
STANDARD (Simple bar graph with 25 / 50 / 75% gradations and
integrated sign).
SYMMETRY (Symmetrical bar graph for positive and negative directions of
flow, with –50 / 0 / +50% gradations and integrated sign).
Factory setting:
STANDARD
Use this parameter to define the second reading to be displayed in the
additional line alternately (every 10 seconds) with the value defined in the
parameter "Add. Line - Assign" ( → Page 99).
Options:
OFF
VOLUME FLOW
MASS FLOW
VOLUME FLOW IN %
MASS FLOW IN %
VOLUME FLOW BARGRAPH IN %
MASS FLOW BARGRAPH IN %
FLOW VELOCITY
TOTALIZER (1 to 3)
AI1 - OUT VALUE
AI2 - OUT VALUE
AI3 - OUT VALUE
AI4 - OUT VALUE
AI5 - OUT VALUE
PID - IN VALUE (controlled variable)
PID - CAS IN VALUE (external set point)
PID - OUT VALUE (manipulated variable)
DEVICE PD-TAG (tag name)
Factory setting:
OFF
!
Note!
Multiplex mode is suspended as soon as a fault / notice message is
generated. The message in question appears on the display. Once the fault
is eliminated, the measuring device resumes operation in Multiplex mode
and the error message is no longer displayed on the local display.
3 Transducer Block
Description
A0001258
A0001259
101