Endress+Hauser Proline Promag 55 Operating Manual page 105

Device functions Proline Promag 55 FOUNDATION Fieldbus
Endress+Hauser
Write access with
Parameter operating mode
(MODE_BLK)
Info Line - AUTO - OOS
Display Mode
Info Line Mux - AUTO - OOS
Assign
"Display" Transducer Block/base index 1800:
!
Note!
The option is not active unless one of the following was selected in the
parameter "Info Line - Assign" ( → Page 103):
• MASS FLOW BARGRAPH IN %
• VOLUME FLOW BARGRAPH IN %
Use this parameter to define the format of the bar graph.
Options:
STANDARD (Simple bar graph with 25 / 50 / 75% gradations and
integrated sign).
SYMMETRY (Symmetrical bar graph for positive and negative directions of
flow, with –50 / 0 / +50% gradations and integrated sign).
Factory setting:
STANDARD
Use this parameter to define the second reading to be displayed in the info
line alternately (every 10 seconds) with the value defined in the parameter
"Info Line - Assign" ( → Page 103).
Options:
OFF
VOLUME FLOW IN %
MASS FLOW IN %
VOLUME FLOW BARGRAPH IN %
MASS FLOW BARGRAPH IN %
FLOW VELOCITY
OPERATING/SYSTEM CONDITIONS
DISPLAY FLOW DIRECTION
TOTALIZER (1 to 3)
AI1 - OUT VALUE
AI2 - OUT VALUE
AI3 - OUT VALUE
AI4 - OUT VALUE
AI5 - OUT VALUE
PID - IN VALUE (controlled variable)
PID - CAS IN VALUE (external set point)
PID - OUT VALUE (manipulated variable)
DEVICE PD-TAG (tag name)
Factory setting:
OFF
!
Note!
Multiplex mode is suspended as soon as a fault / notice message is
generated. The message in question appears on the display. Once the fault
is eliminated, the measuring device resumes operation in Multiplex mode
and the error message is no longer displayed on the local display.
3 Transducer Block
Description
A0001258
A0001259
105